AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
![]() This isn’t usually something you can do if you’re just hanging it on the ceiling of a room, but it’s helpful for projects like mantels and cabinet tops that don’t go all the way to the ceiling.You can open the Window Specification dialog to make changes to the window size, number of lites, materials, and other features as desired. The crown molding I bought as it was was already about $150! That stuff is expensive y’all.Īnother tip for hanging crown molding by yourself is to use clamps if possible. That way when I painted it it looked really expensive and beautiful. I hung my crown molding on top of MDF nailed to the ceiling and the wall. I had a to re-cut it a couple times to be a bit smaller but it’s always better to err on the side of too long. I cut my scarf joint at 22 degrees resting on the Crown Pro and it was nearly perfect every time. I worked from left to right around the room, first hanging the left corner, then cutting the other corner first and marking where I needed the scarf joint to be right in the middle. So why couldn’t this pole act as the other person? I brought the pole in and angled it up against the wall and voila–worked like a charm! I could place the pole exactly where I wanted the crown molding to rest and easily had enough time to get my corner perfectly lined up. I thought basically all I needed was another person to hold up the other end of the crown molding while I nailed in my side. Suddenly I had a brilliant idea! We had bought this super long pole awhile ago to knock down a wasp nest up in the eave of my roof. I needed the crown molding done so I could move onto painting. I texted my brother for help and he said he’d come after work but I was in a bit of a time crunch. I was sweating and exhausted and basically just too weak to achieve it. There I was, nine months pregnant and up on a step ladder, holding an 8 foot piece of crown molding in one hand and a nail gun in the other while trying to nail it in at the perfect angle to make a pretty corner. I cut my angle for the first corner and then tried to put it up. This meant I was going to have to connect them with scarf joints (where you cut them at a 22 degree angle so the transition is more smooth and seamless than a regular 90 degree angle.) This isn’t ideal, but you can’t always do things ideally. Since I didn’t have it delivered or have a truck that allows the transport of such long pieces, I cut the crown molding (which I bought at Home Depot) into lengths of 6′ and 8′. I recently added crown molding to my bedroom which is approximately 16’x13′. Basically the Crown Pro takes the guesswork out of which direction to cut, and it provides a base for your material to sit at the right angle to be cut. I’m not going demonstrate it here, but here’s a video that was helpful. It’s like $30 at a home improvement store but it’s worth it if you’re going to be doing a fair amount of crown molding. ![]() I finally broke down and bought this jig which honestly makes crown molding SOOOOOO much easier. However, before I got the Kreg Crown Pro, I would waste lots of crown trying to get it right. ![]() The first several times I hung it it was on outer corners and in shorter lengths than your typical room ceiling. But is it possible to hang crown molding by yourself? Yes. Caulk is my friend! That being said, I feel like the crown I have put up has ended up looking really nice. But be warned–I’m no expert with it and I’m not a perfectionist. I’ve put up crown molding in my house four or five times, and I’m finally starting to feel like it’s something I can achieve. Since it sits at an angle, you have to deal with all that stuff when cutting it and it can get so overwhelming. Like hanging crown molding.Ĭrown molding on it’s own is a pretty obnoxious thing to deal with anyway. So I started doing my projects on my own which at times can be tricky because there are some jobs that you just have to have more than one person. Especially because if that ‘other person’ is my husband who is always incredibly busy with work. If I want something done, I want it done on my timescale and I absolutely hate having to wait on other people. ![]() Probably the biggest reason I started doing projects myself was out of impatience. This post contains affiliate links, see my disclosure here.
0 Comments
Read More
Leave a Reply. |